How To: Change your amber tail lights to red without paint
akiraboy
HondaCivicWagon.com Founder
alright I hate to post this chopped ass shit but I cannot wait til we-todd isn't so we-todd-did :roll:
Imageshack sucks as well so wtf, here goes!
Link to the site where you can buy this film:
http://importequipment.com/sticker_by_the_foot_transparent.htm
From the pics I think you can see what you need to do.
1. get the film, razor blade, a blow dryer, sprayer bottle with slight dish soap(those of you who have done tint know bout this), some kinda squeege/bondo spreader
2. prep the taillights, over time there is alot of crud on those lenses. I scrubbed em down & I used some 1200 grit sandpaper on some of the crappy spots
3. cut the film to size, if needed use a piece of paper as a template so you don't hack the film to hell. Cut oversized because you will need to shrink the film a bit round the contours.
4. peel it back, spray it with the soap
5. work the film into place, once in place squeegee out all the bubbles.
6. now heres where you need to pay attention: use a hairdryer and start workin the bubbles out. Start workin the film around the edges & fit it up.
7. once the film is to your liking trim it carefully
guys I'll clean this up when I get to upload the rest of the pics
imageshack is screwin up too
Imageshack sucks as well so wtf, here goes!
Link to the site where you can buy this film:
http://importequipment.com/sticker_by_the_foot_transparent.htm
From the pics I think you can see what you need to do.
1. get the film, razor blade, a blow dryer, sprayer bottle with slight dish soap(those of you who have done tint know bout this), some kinda squeege/bondo spreader
2. prep the taillights, over time there is alot of crud on those lenses. I scrubbed em down & I used some 1200 grit sandpaper on some of the crappy spots
3. cut the film to size, if needed use a piece of paper as a template so you don't hack the film to hell. Cut oversized because you will need to shrink the film a bit round the contours.
4. peel it back, spray it with the soap
5. work the film into place, once in place squeegee out all the bubbles.
6. now heres where you need to pay attention: use a hairdryer and start workin the bubbles out. Start workin the film around the edges & fit it up.
7. once the film is to your liking trim it carefully
guys I'll clean this up when I get to upload the rest of the pics
imageshack is screwin up too
Comments
heres where I saw this mod
I'm givin credit where credit is due :!:
as soon as I can I will get some pics of the tails on the car
that is pretty sweet!
that author who you got that mod from is female too..
i've got a stupid question: will it peel off in the rain??