my civicwagon build

hey guys, been building mine for a while now only due to need a operation halfway thru the build (nothing to do with injuring while building the car lol) so here,s my little build thread, its still 1500 carbie for now and auto
this is how the car looked for a few months d2 adjustables and 17inch chromes titans was only a run around at first and had wheel lying around

then it got stolen lol so goodbye d2's and the titans... took to weeks then got the car back

so then the rebuild begain
first get in back on the standard 13's front suspention back in and back in my garage

brought some 15inch steelies got them banded to 15x8 0p and 15x8.5 10p painted primer grey

tyres are 185/55r15 and suspention is superlow springs with the shuttle shocks and drop down hats ( il get pics later) also made the fuel flap green as its something a tad different haha





thats all i have for now, if you have and questions ask away, i will put more pics up with the more i do!
thanks
this is how the car looked for a few months d2 adjustables and 17inch chromes titans was only a run around at first and had wheel lying around
then it got stolen lol so goodbye d2's and the titans... took to weeks then got the car back
so then the rebuild begain
first get in back on the standard 13's front suspention back in and back in my garage
brought some 15inch steelies got them banded to 15x8 0p and 15x8.5 10p painted primer grey
tyres are 185/55r15 and suspention is superlow springs with the shuttle shocks and drop down hats ( il get pics later) also made the fuel flap green as its something a tad different haha
thats all i have for now, if you have and questions ask away, i will put more pics up with the more i do!
thanks
Comments
Wish I could have mine as low as yours, sadly the headers, muffler and sump would be on the ground
Need to be Raised up wen i do the motor swap also panel n paint
To come aswell! Then may sell the steelies n buy 15x8 alloys.
I have a TRUST muffler which is bigger than the OEM one, already has some battle scars. Plus I use my Shuttle for Kayak/Mountain Bike trips so needs SOME ground clearance
And the rebuilt it has no wof or reg lol urs sounds mean,
I wanna put a b18c in and convert to 5spd
i have some 15s at home and planning to widen them too with the same specs as yours!! wer did you get yours done?
From when it got stolen, otherwise i'd be there! Um nah the white sedan is from the northshore
Thats on 15x8's 0p and i got my steelies widened at the steel surgen in manukau! He done a really good job.
Thanks man, took ages to think of a colour to paint them, so primered them to get them preped
And throught thats my colour there n its stayed lol
Hey bro, banded is where they cut the steel rim n put a steel band in them to make them wider, u might have to do some reserch bout where you can get them done where your from, but try ur engineers or a steel place, hope that helps